How to add/ edit/delete Sub Device?

Add Sub Device

To add new sub device

  1. Click Authentication drop down link (in the left pane).
  2. Click New Config tab under Approvals New Config page will be displayed.

New Sub Device

New Sub Device Table

Fields and Buttons

Description

Device Information

Sub Device Name

Enter name of the sub device in the Sub Device Name field.

Parent Device Name

Select the parent device of the sub device from the Parent Device Name drop down menu.

Internal IP

Enter the IP address of the sub device in the IP Address field.

Serial Number

Enter the serial number of the sub device in the Serial Number field.

Mac Address

Enter the Mac address of the sub device in the Mac Address field.

SSID

Enter the SSID of the sub device in the SSID field.

Sub Device Type

Select the type of sub device from the Sub Device Type drop down menu.

Monitoring Information

Is Monitoring

Select Is Monitoring check box to monitor the sub device.

Monitoring Type

Select the monitoring type protocol from the Monitoring Type radio buttons. The options are:

·         HTTP

·         Open

Monitoring Interval

Select the monitoring interval for the device from the Monitoring Interval drop down menu. Or enter the time in minutes in the field beside. The time entered should be more than 10 minutes.

Tunnelling

Enter the tunnelling port number in the Port field for Tunnelling Port.

Select the tunnelling protocol from the drop down field. The options are:

·         HTTP

·         HTTPS

·         SNMP

Notify Enabled

Select Notify Enabled check box to receive notifications through email.

Notify After

Enter the number of failures after which the notification is sent in the Notify After field.

Email Notification

Enter the email address to which the notifications should be sent in the Email Notification field.

Authentication Information

Admin Login

Enter the admin login username in the Admin Login field.

Admin Password

Enter the admin login password in the Admin Password field.

Community Name

Enter the community name (Standard name of the device) in the Community Name field.

Note: It is optional field.

Read Only Name

Enter a name which user wants to give it to the device in the Read Only Name field.

Misc Information

Internal Location

Enter the exact location where the device is installed in the location in the Internal Location field.

Install Date

Enter the date when the device is installed in the location in the Install Date field.

Firmware Version

Enter the version number of the device in the Firmware Version field.

Notes

Enter a short description of the device in the Notes field.

Latitude

Enter the latitude of the location of the device in the Latitude field.

Longitude

Enter the longitude of the location of the device in the Longitude field.

Submit

Click Submit button to save the changes.

Edit Sub Device

To edit Sub Device information

  1. Click Authentication drop down link (in the left pane).
  2. Click List Devices tab under Devices List Devices page will be displayed.
  3. Click the blue edit button (Under Operations column in the table) in front of the entry you have to edit. Edit Devices page will be displayed.
  4. Make the necessary changes.
  5. Click Submit to save the changes.

Delete Sub Device

To delete Config entry

  1. Click Authentication drop down link (in the left pane).
  2. Click List Devices tab under Devices List Devices page will be displayed.
  3. Click the red delete button (Under Operations column in the table) in front of the entry you have to delete.
  4. Confirm Delete pop up will appear. Click Delete button.
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.