How to configure WAN port Settings

To configure WAN port Settings

  1. Click Network
  2. Click the Ports link (Under Network tab).
  3. Click the WAN Port link (in the left pane). Network :: WAN Port Settings page appears.

WAN Port

    4. Select the type of port from the Type drop down menu. The options are:

  • Static: Select Static from the Type drop down menu.
  1. Enter the public IP address of the port in the IP Address
  2. Enter the netmask of the public IP address in the Netmask
  3. Enter the gateway IP address of the ISP connection in the Gateway
  4. Click Submit to save the changes.
  • Dynamic: Select Dynamic from the Type drop down menu. WAN port gets automatically configured, and all its settings are invoked automatically form your ISP connection.
  • 3G: Select 3G from the Type drop down menu.
  1. Enter the username provided by the 3G provider in the Username
  2. Enter the password provided by the 3G provider in the Password
  3. Enter the dial in number provided by the 3G provider to establish the connection in the Dial in Number
  • PPOE: Select PPOE from the Type drop down menu.
  1. Enter the username provided by ISP in the Username
  2. Enter the password provided by ISP in the Password
  3. Enter the MRU (Maximum Receive Unit) provided by ISP in the MRU
  4. Enter the MTU (Maximum Transfer Unit) provided by ISP in the MTU The maximum value is 1492.
  5. Select Auto Reconnect check box to indicate whether the controller should attempt to reconnect if the connection breaks.

   5. Click Submit to save the changes.

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.